Descripción
Nano Tape Bubbles: This is the Nano Tape Bubbles you've been looking for! The newly upgraded nano-glue blister is not easy to break, has stronger elasticity and stronger craftsmanship, which can meet your various DIY ideas.
FUN TOY: This nano tape bubble set can help you focus and relieve stress. You can use it to make a super cute bubble, perfect for playing with kids, boys, girls, friends, classmates, colleagues and family.
Easy to operate: Our nano tape bubbles are easy to operate,
1. Choose the appropriate length of nano tape, 2. Insert the straw, 3. Add your favorite filler (glitter powder, glitter powder, etc.), 4. Seal the edge, 5. Tear off the protective film 6. Dry it with a hair dryer, etc. one time. 7. Then you can blow bubbles.
DIY Nano Tape Bubbles: Like nano tape, bubbles are more durable and more elastic, so they are even more creative. You can make your favorite handmade nano tape according to your preferences, and even fill the bubbles with water or quicksand.
packing list:
1 roll of 5x300 cm nano tape
1*material pack
careful!
Please read the precautions before using Nano Tape Bubbles!
What is the reason why the nano-tape bubbles do not explode?
1. Nano tape does not need to be preheated or the heating time is very short.
Solution: Use a hair dryer to heat evenly for more than 1 minute.
2. The nano-tape around the straw is not tightened, or the edge of the pocket of the nano-tape is not tightened, resulting in air leakage.
Solution: Squeeze the edges of the nano tape bag well before blowing bubbles. Squeeze the nano-ribbon around the straw while blowing the Ribbon Bubble
Nano. 3. The nano tapes are all glued together with no gaps in the middle.
Solution: Be careful not to let the central nanostrips stick together to form pocket-like nanostrips.
4. The straw is blocked by nano tape.
Solution: Note that the straw is placed 0.3-0.5 inches inside the nano-strip and not blocked by the nano-strip.
The cause of the air leak?
1. The nano tape around the straw or the edge of the nano tape is not tight.
Solution: Squeeze the edges of the nano tape bag well before blowing bubbles. After blowing the Nano Tape bubbles, squeeze the Nano Tape where the straw was placed.
2. The edge of the nano tape is very narrow.
Solution: Leave at least 0.2 inches away from the edge of the nano tape.
3. The size of the nano tape you cut is too small, and the air bubbles are too large.
Solution: Do not blow bubbles of single-layer nano-tape to more than 5 inches.
4. Insufficient heating time or irregular heating, resulting in partial rupture and air leakage.
Solution: use a hair dryer to evenly heat the nano tape for more than 1 minute before blowing