Descripción
Description:
This Empty refillable ink cartridge ; with ARC chip perfect for Canon printer. With
transparent cartridge, it is easy to view how much ink left to prevent from
lack of ink to cause air bubbles or how much ink filled in to avoid overfill
for easy operation. There are easy-refill hole and rubber plug on the top of
each cartridge. It is very easy to remove the plug for ink refill and replace
it back after. Save both money and time for you.
;
Features:
Transparent PP Material: With transparent
cartridge, it is easy to view how much ink left to prevent from lack of ink to
cause air bubbles or how much ink filled in to avoid overfill.
Low Consumption & High Efficiency:
Designed to be filled and refilled hundreds of times. Auto reset chips
installed. The ink level will reset to full once you refill the cartridge.
Refillable ink cartridge allow countless refill,save your printing cost.
Universal Compatibility: Empty refillable
ink cartridges,can be refilled ; all types
of ink. Universally suitable for Canon ink cartridge Model PGI-850 CLI-851.
User Friendly: Do not leak ink or drop ink.
Built-in filter to prevent printhead clogged.
Easy to Operate: It is very easy to remove
the plug for ink refill and replace it back after.
;
Specifications:
Cartridge Number: for Canon PGI-850 ; CLI-851
Applicable models: for Canon PIXMA MG5480,
for Canon PIXMA MG6380, for Canon PIXMA MX728, for Canon PIXMA MX928, for Canon
PIXMA IP7280
Type: Universal
Color: PGBK, BK, C, M, Y
Volume: BK, C, M, Y - 12.5ML ; ; ; PGBK - 24ML
;
Package List:
1 * Black Empty Refillable Cartridge with
Auto Reset Chip without Ink
1 * Cyan Empty Refillable Cartridge with
Auto Reset Chip without Ink
1 * Yellow Empty Refillable Cartridge with
Auto Reset Chip without Ink
1 * Magenta Empty Refillable Cartridge with
Auto Reset Chip without Ink
1 * PGBK Empty Refillable Cartridge with
Auto Reset Chip without Ink
;
Installation Notes:
1. The nozzle protection clip should be
removed before the ink cartridge is applied to the machine (for some products),
the tail (air vent seal) on the nozzle of the cartridge must also be torn off.
2. When replacing a new cartridge, clean
the printhead before the original cartridge runs out of ink.
3. After installing the cartridge, let the
cartridge stay in the cartridge for 5 minutes. Clean the printhead until the
nozzle check is normal.
4. If there is a disconnection or lack of
color, let the cartridge stay in the cartridge for 10-15 minutes.
5. If the print problem persists, check the
print head 1 - 3 times until it is unobstructed.
6. If the printer does not recognize the
ink cartridge, remove the ink cartridge and reinstall it. If the printer still
does not work, try restarting the printer.
7. After the cartridge is opened, it should
be used within 6 months to ensure good printing results.
8. Do not remove the ink cartridge from the
printer until the ink has run out.
9. The printer is turned on at least once a
week to prevent the print head from clogging.