DescripciĂłn
specification:
cerium oxide powder capacity 8 oz (230 g)
polishing wheel dameter
felt 2cm/3cm diameter polishing pad
felt 50 mm/2 felt polishing disc diameter 50
mm/2 drill adapter diameter 6 mm/0.24
sandpaper grit 80/320/1000/3000/7000 pad max rpm 12000
characteristics:
1.Cerium is the best polishing powder for rubbing glass because of chemical and physical reaction.
2. Easy to use, simply mix powder with water and apply to the glass surface with the polishing felt to restore lightly scratched windows, mirrors, table tops, windshields, glass tables, shower screens, windshields, fish tanks, even car headlights to like-new condition.
Suggested instructions for using cerium oxide:
(1) Supplies needed:
1.cerium oxide
2.water (some recommend distilled water)
3.polishing wheel
4.electric drill
5.Small plastic tubs (beer or quart size)
6.spray bottle
(2) instructions:
1. Clean the area you are going to work on thoroughly. Make sure there is no dirt or grime on the glass as this may result in additional scratches once you begin polishing.
2. have two small plastic tubs ready; Liter or pint size containers work well. fill half with water.
3. Place your polishing wheel into the water; let it be completely damp, but not dripping wet.
4. Pour some cerium oxide into the empty bathtub and add enough water to create a slurry (a thin, paste-like mixture).
5. Connect the dampened buffing wheel to your electric drill and dip it into the paste.
6. Place the buffing wheel on your desktop, use small size felt wheel if the scrach is near the corner of the windows, keep the wheel moving in a circular motion up and down. Make sure the paste doesn't dry out, as this could cause your cup to overheat and break. If your paste is getting dry, you can spritz it with a spray bottle filled with water.
package included:
1 x 230 g of cerium oxide powder
1 x 2 cm felt polishing wheel
1 x 3 cm felt polishing wheel
2 x polishing disc with 6 mm drill adapter
4 x 2 diameter wool polishing pad
25 x sandpaper (5 pieces/each grit)