Descripción
Product model: KW808
Scope of application: a variety of 12V gasoline vehicles
System language: Support five languages: English, French, German, Dutch, Spanish.
Working temperature: -60--+60
Voltage: 12
Applicable models: a variety of 12V cars
Characteristics:
1.Reads and clears generic OBD II trouble codes (including pending codes)
2. Turn off the check engine light (MIL)
3. Shows the generic codes P0, P2, P3, U0 and the manufacturer specific codes P1, P3 and U1
4. Displays OBD2 monitor and I / M readiness status
5. Detect OBD-II freeze frame information
6.Reads the live PCM data stream
7. Displays live O2 sensor test data
8. Take this module test
9. Supports CAN (Controller Area Network) and all other current OBD-II protocols
10. Built-in DTC OBD-II Lookup Library
11. State Emissions Verification (OBD2)
12. Retrieves vehicle information (VIN, CID and CVN)
13. Determines the status of the Malfunction Indicator Lamp (MIL)
14. Code definitions displayed on unit display
15. Unit upgradeable via the Internet
16. Highly reliable and accurate
17. Large 128 x 64 LCD screen with crystal clear backlight and easy to read
18. Communicates securely with the on-board computer
How to see if your vehicle is OBD II compliant?
Open the hood and look for a decal called "VEHICLE EMISSION OUTLINE INFORMATION.
Note:
Open the front cover of the car or the engine manual. Please check your engine model and support the communication protocol:
1 CAN. (Zone Network Controller)
2. J1850PWM
3. J1850VPW
4. KWP 2000 ISO 14230-4
5. ISO 9141
Package:
1 x scanner
1 x 1.5m cable
1 x nylon case
1 x manual.
——KONNWEI KW808
The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
Product Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:--- English, French, German, Dutch, Spanish
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC
Works with the following:
OBDII/EOBD coverage(US, Asian & European) Reads & clears generic and some maunfactures trouble codes.