Descripción
H508 OBD Car Charger Driving Recorder Power Cord 12/24V To 5V With Switch Low Pressure Protection Line, Specification Mini Left Elbow.
1. Material ABS
2. Input voltage DC 12-36V
3. Output DC 5V/3000mA, DC 12V/1500mA
4. Output interface MINI/MICRO
5. OBD connector 16-pin (positive /4-5-pin (negative
6. Scope of application vehicle charging cable, driving recorder step-down cable, time-lapse video ACC power cable
7. Power supply mode
-ACC mode when the car is on fire, the power cord will start to output power; when the car is turned off, the power cord will automatically stop power supply and turn off the output after 5 minutes
-Normal power mode 24 hours uninterrupted power supply from the power cord
8. Low-voltage protection The power cord has a built-in MCU program control chip, which can accurately detect the battery power of the car in real time. When the battery power of the car is lower than 11.8V (12V car or 23.6V (24V car , the power line will automatically start low-voltage protection. Turn off the output in seconds
9. Size wire diameter is about 3.5mm, wire length is about 3.5m
10. Weight about 98.9 grams (including packaging