Descripción
specification:
Product: Xiaoda automatic water-saving switch
Power consumption: 0.2mW
Hydraulic pressure: 0.05-0.8MPa
Working water temperature: 75 degrees
Detection range: side sensor 0-5cm / bottom sensor 0-10cm
Water consumption: water efficiency
Waterproof rating: IPX6
Valve seat diameter: 22mm
Inlet and outlet pipe diameter: 22mm
6 conjuntos de adaptadores (adaptadores externos M20 / M22 / G1 / 2 internos e M20 / M22 / M24)
feature:
When you feel the water is flowing, there is no need to transfer stains or touch the faucet, just reach out.
Two detection modes (bottom and side sensors) effectively save water
Instant mode: The bottom sensor (detection distance 0-10 cm) can realize fast water flow and automatically stop after draining water for 20 seconds.
Continuous mode: The level sensor (detection distance is 0-5 cm) makes the water flow for 3 minutes.
The optimized infrared sensor combines MCU algorithm and air jet technology, energy saving and environmental protection design, and realizes smart life.
Small size, easy to install, 6 types of adapters suitable for ordinary mainstream faucets
Use the USB cable to charge, the charging time is 3 hours, and the longest use time is 6 months.
Main features
Prevent accidental contact
Side sensor window
No debris within 10cm
Bottom sensor window
The height of the bottom of the pool should not be less than 15 cm
Real-time mode
Wash your face and wash the new and interesting bottom sensor to meet short-term water needs. When the sensor enters the bottom sensing area (limiting distance is 10 cm), water starts to flow. When the sensor leaves, the water stops flowing. If the sensor stays in the bottom sensing area, the water will stop automatically after draining for more than 20 seconds, which is essential for daily cleaning.
Water storage method
The side and side sensors of the pot meet the water storage requirements. When the sensor enters the side sensing area (limiting distance is 5 cm), water starts to flow. The drainage time lasts for 3 minutes, even if an object is felt to leave, the water still exists. If the sensor enters the side sensing area again during the draining process, the water can be stopped at any time, which is a good choice for water storage.
notes:
Color 1. Due to different shooting light and display exposure, this item may show slight aberrations.
2. Product size, product weight and related specifications are only theoretical values. Actual measurement value-may vary by product.
packing list:
1 *Intelligent induction water saving device