Descripción
Product description:
R-SPS series high-power DC power supply is a high-performance switching DC developed specifically for industrial applications.
Power Supplier. This series of products is a single output, high precision dual display, voltage and current are within the nominal value.
Continuously adjustable, with strong load capacity, low continuous failure rate, stable performance, low ripple noise, etc.
point. Complete over-voltage, over-current, over-temperature, overload, short-circuit and other protection functions can be used to supply SPS series power supply.
The device and load are protected from accidental damage.
R-SPS series power supply has temperature control circuit, intelligent fan with excellent heat dissipation effect and low noise. Is a research unit, real
The best choice for laboratory, teaching, production line, and product life testing.
Features:
1. Small size, light weight and low ripple;
2, using PWM modulation, high efficiency, power, and stable performance;
3, intelligent temperature control circuit, good heat dissipation effect, low noise;
4, voltage, current, Power triple LED display, intuitive;
5, voltage regulation, current limit, simple operation;
6, multiple protections such as overvoltage, current limiting, over temperature, over work, short circuit;
Applications:
1. Production line testing;
2, electrical maintenance and repair;
3. Life product aging test;
4, battery charging;
5. Laboratory, scientific research and teaching;
6. Any other occasion where a DC stabilized power supply is required;
Product parameters:
Output Current:0~100V
Output Voltage:0~10A
AC input : AC 220V +-10por ciento 50Hz
Port:USB
Output power: see specification sheet
Voltage value display: 4-digits LED digital tube
Display resolution: 0.1V
Current value display: 4-digits LED digital tube
Display resolution: 0.1A
Output overvoltage protection: built-in O.V.P protection, some models can be set externally
Output overcurrent protection: current limiting, overload, short circuit constant current output
Over temperature protection: Built-in O.T.P protection, protection value is 85 Celsius +- 5 Percent, turn off the output after protection
Output polarity: output positive (+), negative (-) can be grounded arbitrarily
Heat dissipation method: temperature control circuit forced air cooling
Operating environment Temperature: 0Celsius~40Celsius; Humidity: 10Percent~85Percent RH
Storage environment Temperature: -20 Celsius ~ 70 Celsius; Humidity: 10Percent ~ 90PercentRH
Description: All values are typical, so they will exceed in different loads or other situations.
Over this value. Accuracy is measured at the load terminal voltage detection state, at temperature
In the case of degree error and component aging, there may be a deviation between the actual value and the rated value.