Microcontrolador Microchip Pic32mx150f128b 50mhz 128kb Pic32

Descripción

****************** COLDFIRE ELECTRONICA *******************




Potente microcontrolador de 32 Bits de bajo costo, encapsulado compacto.


Es el primer Microcontrolador de 32 Bits en el mercado en encapsulado DIP.



Microchip PIC32MX150F128B-I/SP:


50 MHz, 32-bit RISC CPU with less than 0.5 mA/MHz current consumption
Max I/O Pins: 21 ( PortB 16 I/O, PortA 5 I/O )
Pin Count: 28
Two I2S/SPI modules for Codec and serial communications
Peripheral Pin Select (PPS) functionality
Parallel Master Port (PMP) for graphics interfaces
Supports mTouchTM Capacitive touch buttons and sliders
Provides high-resolution time measurement (1 ns)
On-chip temperature measurement capability
Temperature Range - 40°C to 105°C
Operating voltage range of 2.3V to 3.6V
Up to 128KB Flash memory (plus an additional 3 KB of Boot Flash)
Up to 32K SRAM memory
1.56 DMIPS/MHz (Dhrystone 2.1) performance
MIPS32® M4K® core with MIPS16e® mode for up to 40% smaller code size
Pin-compatible with most Microchip 16-bit devices
Multiple power management modes
Configurable WDT with on-chip Low-Power RC oscillator for reliable operation
Peripheral Pin Select (PPS) functionality
Up to 4 channels of hardware DMA with automatic data size detection
Two UART and I2C™ modules
Internal Oscillator: 8 MHz, 32 kHz
Separate PLLs for CPU and USB clocks
Hardware Real-Time Clock and Calendar (RTCC)
Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
Five Capture inputs and Five Compare/PWM outputs
Data communication: I2S, LJ, RJ, DSP modes
Control interface: SPI and I2C™
Generation of fractional clock frequencies
Can be synchronized with USB clock
Can be tuned in run-time
Up to 13-channel, 10-bit ADC
Three Analog Comparators
Charge Time Measurement Unit (CTMU)
Four programming and debugging Interfaces
IEEE Standard 1149.2 compatible (JTAG) boundary scan

Sin garantía